Features:

Techspray offers SR, AR and UR conformal coating formulas for a wide variety engineering requirements including thermal, moisture & static resistance. All coatings are IPC-CC-830B and UL94 V-0 qualified.

Techspray offers a variety of conformal coating formulas for differing field or engineering requirements and is IPC CC 830B and UL94-0 Qualified or rated. Specifications generally depend on the type of protection needed: e.g., thermal, moisture, or static resistance.

Coatings contain Opti/Scan (except LED Coating) to allow quality control inspection of coverage and evenness of the coating on a PCB. A coated board can be passed under a standard, low-cost UV (short-wave black) light to fluoresce the coated areas. The brighter the glow, the thicker the coating.

Fine-L-Kote™ SRV is a high gloss, ultra-clear conformal coating that is moisture and abrasion resistant. This coating offers resilient, mechanical stress-reducing PCB protection, and is low VOC. It extends component life by protecting against adverse environments, with resistance to moisture, salt, fungus, and corrosive vapors. Because of its exceptional dirt, dust, and soil repellency, the coated surfaces remain clean longer.

APPLICATIONS:

Silicone conformal coating provides excellent protection in a very wide temperature range. SR provides good chemical resistance, moisture and salt spray resistance, and is very flexible. Silicone conformal coating isn’t abrasion resistant because of its rubbery nature, but that property does make it resilient against vibrational stresses. Silicone coatings are commonly used in high humidity environments, like outdoor signage. 

Features:

• Low VOC
• Low toxicity – HAPs free
• Exceptional surface finish – high gloss, superior transparency
• Moisture resistant
• Corrosion resistant
• Vibration resistant & flexible
• Thermal resistance – 392°F (200°C)
• Dielectric strength – 720 volts/mil
• RoHS Compliant

Turbo-­Coat Acrylic Conformal Coating is designed to speed up board production throughput without additional investment of expensive UV systems or other capital equipment. Conformal coating cure time is often considered a production bottleneck for PCB assembly operations. Turbo­Coat (standard viscosity) dries tack­free in 3 minutes, allowing manufacturers to handle boards in 1/3 the time of the leading acrylic coating! Full cure can be achieved as quickly as 10 minutes with elevated temperatures.

APPLICATIONS:

Acrylic conformal coating is recognized for its high dielectric strength, and fair moisture and abrasion resistance. What generally distinguishes acrylic coating from other resins is ease of removal. Acrylic coatings are easily and quickly removed by a variety of solvents, often without the need of agitation. This makes rework and even field repair very practical and economical. 

Features:

• Fastest cure – dry to touch in 3 minutes!
  
• Low toxicity
• No Toluene, Xylene or MEK
• UL94 V-0 rated – nonflammable final coat
• Fast & easy rework & repair
• UV indicator for black light QC inspection

APPLICATIONS:

Acrylic conformal coating is recognized for its high dielectric strength, and fair moisture and abrasion resistance. What generally distinguishes acrylic coating from other resins is ease of removal. Acrylic coatings are easily and quickly removed by a variety of solvents, often without the need of agitation. This makes rework and even field repair very practical and economical.

Features:

• Max operating temperature up to 392°F (200°C)
• Dielectric Strength 640 volts/mil
• Non-ozone depleting
• Rigid, Hard Coating

APPLICATIONS:

Acrylic conformal coating is recognized for its high dielectric strength, and fair moisture and abrasion resistance. What generally distinguishes acrylic coating from other resins is ease of removal. Acrylic coatings are easily and quickly removed by a variety of solvents, often without the need of agitation. This makes rework and even field repair very practical and economical.

Features:

• Max operating temperature up to 392°F (200°C)
• Dielectric Strength 640 volts/mil
• Non-ozone depleting
• Rigid, Hard Coating

APPLICATIONS:

Fine-L-Kote™ LED2 is specifically designed and formulated for light emitting diode applications, where a completely transparent coating is required to provide a tough, extremely flexible protective coating.  It provides the highest flexibility for extreme temperatures on the flex and rigid circuitry found on LED displays and provides an outstanding non-stick surface for soil repellency. 

Features:

• Transparent to visible wavelengths, will not block or change light intensity or wavelength
• Exceptional dirt, dust, and soil repellency; surfaces remain clean longer
• Extends component life by protecting against adverse environments
• Good insulation properties help with circuit insulation characteristics,
• Excellent flexibility minimizes thermal stress
• Resists moisture, salt, fungus, corrosive vapors, and severe environments
• Engineered to withstand the heat generated by electronic circuitry as well as climatic temperature extremes
• Passes Cree Coating Chemical Compatibility for Direct and Proximity Testing, MX-6 and XP-E
• Meets IPC-CC-830B
• UL 94 V-0
• Room temperature moisture cure can be heat accelerated
• RoHS compliant

APPLICATIONS:

High Temperature Silicone Coating is designed to prevent thermal break­down at high temperatures. SR provides good chemical resistance, moisture and salt spray resistance, and is very flexible. Silicone conformal coating isn’t abrasion resistant because of its rubbery nature, but that property does make it resilient against vibrational stresses. Silicone coatings are commonly used in high humidity environments, like outdoor signage. 

Features:

• Designed for high temperature environments
• Fast-drying silicone 1-step process
• UL94 V-0 rated
• Thermal resistance – to 662°F (350°C)
• Dielectric strength – 560 volts/mil
• Meets IPC-CC-830B
• Passes the laboratory tests of MIL-I-46058C. However, it is not qualified on QPL-46058.
• Moisture resistant
• Vibration resistant – flexible
• UV indicator for black light inspection

APPLICATIONS:

Turbo-Coat Thinner is available to reduce the viscosity to fit ideal process parameters. Turbo-Coat, Turbo-Coat HV, and Turbo-Coat Thinner are all HAPs (Hazardous Air Polutants) free, so do not contain common coating solvents like Toluene, Xylene, and MEK. This makes these coating more user friendly and safe.

Features:

• Compatible with All Turbo-Coat Coatings
• MEK, Toluene & Xylene Free
• Low Toxicity
• Also Used as Stripper & Nozzle Cleaner

APPLICATIONS:

Quickly and precisely removes most conformal coatings including acrylic, urethane, and silicone.

Features:

• Fast stripping action
• Non-corrosive
• Non-ozone depleting
• Rapid evaporation

APPLICATIONS:

Fine-L-Kote Conformal Coating Remover XT is a solvent designed to remove acrylic, silicones, urethanes, and single component epoxy coatings. Ideal for use in soak application. Simply immerse the part to be cleaned into the solvent and wipe away residue. Can be used for soak applications, or with natural bristle brushes, natural fiber swabs, and wipes. Do not use foam swabs.

Features:

• Strong cleaner for dissolving most common types of coatings
• Will remove silicones, acrylics, urethanes and one component epoxies
• Safer solvent – no MEK, xylene and other highly toxic solvents
• Non-corrosive
• Non-ozone depleting